Hydraulic Assist

  • Steering Box Plug

    1/4" NPT plug fitting. Used to plug steering box ram outlets. A pair of these plugs can be used to disconnect a hydro ram from the steering box. 1/4" NPT Plug, 130033-1-KIT

    ONLY 1.49

    Buy Now
  • Jam Nut, 3/4", 2" Ram

    Our jam nuts are made for 5/8" and 3/4" rod ends for our hydro assist kits.

    ONLY 1.89

    Buy Now
  • Jam Nut, 5/8", 1.5" Ram

    Our jam nuts are made for 5/8" and 3/4" rod ends for our hydro assist kits.

    ONLY 1.89

    Buy Now
  • Hydraulic Line Repair Fitting

    These fittings make great trail spares for the tool box. If a hydro line becomes damaged, simply cut out the bad section of tubing and insert one of these repair fittings into the line. Only for use on low pressure lines and return lines. Not intended for long term use on the high pressure line from the pump to steering box.

    ONLY 15.39

    Buy Now
  • Low Pressure Return Fitting

    Low Pressure Return Fitting, 130508-1-KIT

    ONLY 19.99

    Buy Now
  • replacement filter (fits 130565-1-kit)

    This replacement TG Hydraulic Filter is designed specifically for our Reservoir Filter and is compatible with hydraulic oil and power steering fluids

    ONLY 19.99

    Buy Now
  • Hydro Bracket, 1.5" Ram, Tie Rod

    Our mounting brackets have a 5/8" bolt hole. The Hydro Assist Brackets are designed to fit a Toyota solid axle front housing and 1.25" tie rod.

    ONLY 29.19

    Buy Now
  • Hydraulic Hose, 50" Long, Ram Steering

    Available parts: Hydraulic Hose, 50" Long, Ram Steering, 130255-1-KIT Elbow Fitting, #6 JIC, 130256-1-KIT Available parts:

    ONLY 29.19

    Buy Now
  • Ram Assist Rock Assault Front Axle Housing Bracket - 1.5" Rams

    Our mounting brackets have a 5/8" bolt hole. The Hydro Assist Brackets are designed to fit a Toyota solid axle front housing and 1.25" tie rod.

    ONLY 27.59

    Buy Now
  • Orbital Mounting Kit

    Finally an easy way to mount your orbital without all the measuring and fabrication work. This kit is so simple that anyone with basic welding skills can have it fully installed in under an hour. The 3 plates that make up the kit are laser cut out of 3/16 inch steel, and precision machined for a perfect fit. This kit will fit most standard style orbitals used in this application. Kit is shipped unpainted and unwelded. Orbital Mounting Kit, 130295-1-KIT

    ONLY 30.69

    Buy Now
  • Reservoir Filter Bracket

    Our Rock Assault™ Reservoir Filter Bracket bolts right to the back of our Rock Assault™ Reservoir Filter Kit (into the pre-tapped holes) and allows you to either weld the other side of the bracket to your cage (coped for 1 1/2” tubing) or simply butt weld it to a piece of flat stock.

    ONLY 44.49

    Buy Now
  • Ram Clamp w/Weldable Mount

    This mount are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig.

    ONLY 44.49

    Buy Now
  • Double Shear Steering Bracket Kit

    Strengthen your steering system and protect against wallowed out steering arms. This kit allows the heims of a fully hydraulic steering system to be mounted in double shear.

    ONLY 59.89

    Buy Now
  • Double Ended Ram Mounting Kit

    This kit will take almost all the fabrication work out of mounting your Rock Assault™ Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on the ends for a custom fit.

    ONLY 151.99

    Buy Now
  • Tie Rod Kit, Full Hydro

    Trail-Gear has made the perfect kit for building tie rod links for use with a double-ended ram. Based tie rod ends, which is why Trail-Gear uses only our own brand of Chromo Rod Ends. The main body of each rod end is 100% 4340 chromoly, and the ball of each rod end is made out of AISI 52100 material and then hard chrome-plated for an extremely tough finish.

    ONLY 213.39

    Buy Now