Availability Date (Near-to-Far)
Availability Date (Far-to-Near)
1/4" NPT plug fitting. Used to plug steering box ram outlets. A pair of these plugs can be used to disconnect a hydro ram from the steering box. 1/4" NPT Plug, 130033-1-KIT
Our jam nuts are made for 5/8" and 3/4" rod ends for our hydro assist kits.
These fittings make great trail spares for the tool box. If a hydro line becomes damaged, simply cut out the bad section of tubing and insert one of these repair fittings into the line. Only for use on low pressure lines and return lines. Not intended for long term use on the high pressure line from the pump to steering box.
Low Pressure Return Fitting, 130508-1-KIT
This replacement TG Hydraulic Filter is designed specifically for our Reservoir Filter and is compatible with hydraulic oil and power steering fluids
Our mounting brackets have a 5/8" bolt hole. The Hydro Assist Brackets are designed to fit a Toyota solid axle front housing and 1.25" tie rod.
Available parts: Hydraulic Hose, 50" Long, Ram Steering, 130255-1-KIT Elbow Fitting, #6 JIC, 130256-1-KIT Available parts:
Finally an easy way to mount your orbital without all the measuring and fabrication work. This kit is so simple that anyone with basic welding skills can have it fully installed in under an hour. The 3 plates that make up the kit are laser cut out of 3/16 inch steel, and precision machined for a perfect fit. This kit will fit most standard style orbitals used in this application. Kit is shipped unpainted and unwelded. Orbital Mounting Kit, 130295-1-KIT
Our Rock Assault™ Reservoir Filter Bracket bolts right to the back of our Rock Assault™ Reservoir Filter Kit (into the pre-tapped holes) and allows you to either weld the other side of the bracket to your cage (coped for 1 1/2” tubing) or simply butt weld it to a piece of flat stock.
This mount are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig.
Strengthen your steering system and protect against wallowed out steering arms. This kit allows the heims of a fully hydraulic steering system to be mounted in double shear.
This kit will take almost all the fabrication work out of mounting your Rock Assault™ Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on the ends for a custom fit.
Trail-Gear has made the perfect kit for building tie rod links for use with a double-ended ram. Based tie rod ends, which is why Trail-Gear uses only our own brand of Chromo Rod Ends. The main body of each rod end is 100% 4340 chromoly, and the ball of each rod end is made out of AISI 52100 material and then hard chrome-plated for an extremely tough finish.