Miscellaneous

Miscellaneous

Miscellaneous

  • Weld Washers

    Over time, bolts on steering and suspension components tend to “wallow out” the bolt holes on their respective brackets. It is important to strengthen these brackets to ensure that failure does not occur.

    ONLY 6.09

    Buy Now
  • MOUNT, SINGLE, 2.00" CRADLE RADIUS

    These steel reservoir mounts are great for securing a shock reservoir, fuel pump, fuel filter, or almost anything else that has an O.D. of 2” or 2-1/2”. They can be welded on to almost any size of round tubing. We’re offering these mounts individually or in sets of (2) mounts with (2) stainless steel SAE #40 hose clamps. The mounts are shipped raw and will require painting after welding.

    ONLY 6.09

    Buy Now
  • Exhaust Manifold Stud and Nut Kit

    When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly.

    ONLY 6.09

    Buy Now
  • Limiting Strap Clevis Mounting Tube

    Our weld-on Clevis Mounts allow you to quickly and easily mount your Super Metal Clevis to your rig. Both are made out of seamless 1020 steel DOM tubing.

    ONLY 6.09

    Buy Now
  • fitting, 1/4" pipe to #6 jic

    fitting, 1/4" pipe to #6 jic

    ONLY 6.09

    Buy Now
  • Oval Trail Tag

    The Trail-Gear logo is now available as a weld-on tag. Precision laser cut from 14 gauge steel and ready to weld, these tags are perfect for welding onto axle housings, bumpers, garage refrigerators, toolboxes, vehicles and much more! They come raw and ready to customize. Sold individually. The dimensions of our Oval Trail Tag 2"x4".

    ONLY 7.69

    Buy Now
  • Motor Mount Plate

    These plates are used to cover the motor mount after doing a solid axle swap. Made from 1/8" steel plate, 2" X 7". Weld in place after installing solid axle conversion.

    ONLY 7.69

    Buy Now
  • ARB Switch Actuator

    Blank switch cover for use with ARB switch body. Perfect for use with ARB Lockers or the Trail-Gear Rear Disconnect. Kit includes labels for use with the Trail-Gear Rear Disco or you can customize it with your own labels to suit your needs.

    ONLY 7.99

    Buy Now
  • Socket Allen, 3/8" Drive x 10mm

    Socket Allen, 3/8" Drive x 10mm

    ONLY 10.69

    Buy Now
  • Adapter,2.5" ID/2.5" ID,3"Long,Silicone

    Building your own custom air intake or cooling system? Trail-Gear is proud to offer the same silicone adapters and couplers that we use on our own Extreme Air Intake line. We have the most popular sizes, including the hard-to-find 2.5” to 2.81” adapter that fits the Mass Airflow Sensor on the Toyota Pickup/4Runner 22RE engine.

    ONLY 13.79

    Buy Now
  • YMS1167 - Side seal for R180

    Side seal for R180R180 side seal.Yukon Mighty seal.

    ONLY 13.39

    Buy Now
  • YSPRET-003 - Toyota bearing retainer for '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

    Toyota bearing retainer for '01-'02 4Runner, '01-'04 Tacoma & 00-'06 TundraToyota bearing retainer for '01-'02 4Runner, '01-'04 Tacoma & 00-'06 Tundra

    ONLY 13.39

    Buy Now
  • Air Injection Tube Blockoff Plate Kit

    Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube. This kit contains 2 plates that will allow you to install our headers without the air injection tube. The small plate is an O2 sensor blockoff plate for guys running propane. No gaskets are supplied with this kit. The kit uses the gaskets that are already supplied in the header kit.

    ONLY 21.49

    Buy Now
  • Rear Bumper Trail Tags

    If you’re rocking a Trail-Gear Rear Bumper on your Toyota Pick-up or Tacoma you are going to want a set of these! Let everyone know that you’ve got Trail-Gear protecting your vehicle with our new Rear Bumper Trail Tags.

    ONLY 24.59

    Buy Now
  • YMSG1014 - 7.2" shifter seal.

    7.2" shifter seal.7.2" shifter seal.Yukon Mighty seal.

    ONLY 18.39

    Buy Now
  • Tube Door Trail Tags

    If you’ve got Trail-Gear Tube Doors you are going to want to tag them with our new Tube Door Trail Tags! Precision laser cut from 12 gauge steel featuring the Trail-Gear logo

    ONLY 29.19

    Buy Now