Availability Date (Near-to-Far)
Availability Date (Far-to-Near)
M10 x 1.25 x 48, which is a 10mm stud diameter, 1.25 metric thread pitch, and 48 mm overall length.
Stock replacement nut. Fits diff or transfer case. Pinion Nut, 140075-1-KIT
Available as a 7.9mm (0.311") or 6.35mm (0.250") diameter.
Margasket is a special gasket that fits between your 1979-1995 4-cylinder transmission and gear drive transfer case
Triple Drilled Flange Dust Shield, Transfer case.
Marlin Crawler is proud to release it's latest edition to it's EcoSeal product line with our very own Heavy Duty Transfer case output seal!
This is a brand-new replacement cage bearing that supports the low speed gear onto the output shaft of a 1979-1995 RF1A transfer case.
This is a brand-new replacement pocket bearing that supports the input gear to the output shaft of a 1979-1995 RF1A transfer case.
Sometimes you may not need a full transfer case rebuild kit, but rather just a couple bearings. For this very reason we are offering common transfer case bearings that may be purchased right from us!
When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedometer cables to a dual adapter.
Sometimes you may not need a full transfer case rebuild kit, but rather just a couple bearings. For this very reason we are offering common transfer case bearings that may be purchased right from our website
We are now carrying Land Cruiser split transfer case low and high speed gear bushings.
Marlin Crawler is proud to release the first ever Toyota Five Pattern Transfer Case Flange. This flange was created with 16 holes comprising of 5 different flange bolt patterns that accommodate 18 different driveline bolt pattern applications.
Finally a Toyota T case mount that can handle the abuse of rock crawling with the ultra low torque of dual cases is here.
ur heat treated shift rod compliments our heat treated shift fork, which is already manufactured to fit either a stock 2.28:1 case or a 4.70:1 case without any fork grinding required