Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts

Overland Rocker Flip Step, Pair, JK, 2-Door

538.69 BCC Off-Road Parts Only 538.69

0 0 review(s)

SKU | MC-3322

Manufacturer: Metal Cloak

x 538.69
Buy Now

MetalCloak adds functionality and protection with the JK Wrangler Overland 2 Door Rocker Flip Step.

The Overland 2 Door Rocker Flip Step bolts right to the boat-side style protection plate. The Overland 2 Door Rocker Flip Step offers high clearance and incredible durability, made from the 3/16" cold rolled steel and can be easily removed if you want to use The Overland 2 Door Rocker Rail System with or without the step rub rail.

The JK Overland Flip Step can be mounted in multiple configurations creating an easy Step Plate or a Rub-Rail & Low-Step combination.

Note: You MUST have MetalCloak JK Wrangler Overland Rocker Base to mount this step. The step only mounts onto the MetalCloak Overland Rocker Base.

JK 2 DOOR OVERLAND ROCKER SYSTEM

Overland 2 Door Rocker Rail

MetalCloak adds functionality and protection with theOverland 2 Door Rocker System. 

The Overland 2 Door Rocker System is a boat-side style protection plate that offers high clearance and incredible durability, made from the 3/16" cold rolled steel and can be used with or without the step rub rail.

OEM Clevite and Typical Flex Joint is the Duroflex Joint

JK 2 DOOR ROCKER EXO-SKIN

The JK Rocker ExoSkin provides strength, reinforcement and a rugged look.

Easily bolts on with the installation of a few rivet nuts. Once installed, easily removed to clean mud and grime off the JK body.

Creates instant protection and a strong rugged look. Can be used with or without our Rocker Rail.

JK LEDS

OEM Clevite and Typical Flex Joint is the Duroflex Joint

JK WRANGLER UNLIMITED CENTER SEAT SUPPORT

Seat Support

The MetalCloak JK Wrangler Seat Support... 

If you've got a four door Wrangler, you are going to want this bracket. End the uncomfortable back seat ride with this simple bracket.

Easy to install, just watch the video below...

It's bad enough being stuck in the middle, why be uncomfortable too?

OEM Clevite and Typical Flex Joint is the Duroflex Joint

LOW-PROFILE LEDS

The Low-Profile two light system, designed specifically for the JK uses a single LED light on the inside on your MetalCloak JK Overline and OverLAND Fenders. 

BULBS:

  • 2 bright, 12 volt, single bulb AMBER LEDs
  • Fits in standard MetalCloak front fenders & inner fender wells (purchased after 10/25/09)
  • 3/4" light with rubber gasket housing
  • Installation and wiring instructions included

Click the image to the right to learn more. >>>

JK LEDS

OEM Clevite and Typical Flex Joint is the Duroflex Joint

Be the first to review this product.

Write Review

All posts are moderated and all fields are required. Your email address WILL NOT be shown on site. Only your name, review rating, title and review text will be published on the site after approval.

  • Weight : 40 LBS