Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts

Long Travel 5100 Rear 96-02 4Runner Shocks

309.29 BCC Off-Road Parts Only 309.29

0 0 review(s)

SKU | 9602E703

Manufacturer: Toytec

x 309.29
Buy Now

Long Travel 5100 Rear 96-02 4Runner Shocks

These are long travel rear Bilstein 5100 series shocks outfitted to work with your 3rd Gen 4Runner and should only be used with our Toytec Superflex 024RCB coils or long rear lift coil springs.

If NOT used with coil springs at least as long as our 024RCB coils, you will need to hard mount your internal spring bump stops, mount your rear springs to the axle perch, and extend the axle bumps. There is a high possibility of spitting a spring at full droop if you use too short of a coil spring in back.

Perfect match for our Toytec rear 024RCB coils to gain the most rear flex as possible without many additional mods.
We still advise checking full compression and droop after install to determine if your 4Runner needs to be bump stopped or if any other mods need to be made to any ABS or brake lines.

The installation of a longer rear brake line is required with these rear shocks.

Be the first to review this product.

Write Review

All posts are moderated and all fields are required. Your email address WILL NOT be shown on site. Only your name, review rating, title and review text will be published on the site after approval.

  • Weight : 10 LBS