Description
Experience the benefits of hydro assisted steering with a range of rams for a full spectrum of applications.
Our Single-Ended Ram models are available in 6″ stroke versions for Toyota steering knuckles and 8″ stroke versions for Dana-style knuckles. They all have high-temperature inner and outer seals for high-performing longevity.
Rod-ends for these Rams are sold separately. The 1-1/2″ and 2″ bore Rams have a 3/4″ diameter rod that will accept a 3/4″ female rod end. The 2-1/4″ bore Rams have a 1-1/8″ diameter rod with a 3/4″-16 pitch threaded hole in its end to accept 3/4″-16 threaded male rod ends.
See the table below for dimensional and force specifications.
| Trail-Gear Single-Ended Hydro Assist Ram Models & Specifications | FORCE WITH 1650 PSI PUMP | |||||||
| SKU | RAM TYPE | CYLINDER O.D. | BORE | KNUCKLE TYPE |
STROKE | ROD DIAMETER |
SHAFT SIDE (RETRACTION) |
NON-SHAFT SIDE (EXTENSION) |
| 130602-1-KIT | Single-Ended | 1-7/8″ (48 mm) | 1-1/2″ (38 mm) | Toyota | 6″ (152 mm) | 3/4″ (19 mm) | 2186 lbs (992 kg) | 3888 lbs (1764 kg) |
| 303517-KIT | Single-Ended | 1-7/8″ (48 mm) | 1-1/2″ (38 mm) | Dana | 8″ (203 mm) | 3/4″ (19 mm) | 2186 lbs (992 kg) | 3888 lbs (1764 kg) |
| 130600-1-KIT | Single-Ended | 2-3/8″ (60 mm) | 2″ (51 mm) | Toyota | 6″ (152 mm) | 3/4″ (19 mm) | 4455 lbs (2021 kg) | 5184 lbs (2351 kg) |
| 130601-1-KIT | Single-Ended | 2-3/8″ (60 mm) | 2″ (51 mm) | Dana | 8″ (203mm) | 3/4″ (19 mm) | 4455 lbs (2021 kg) | 5184 lbs (2351 kg) |
| 304093-0600 | Single-Ended | 2-5/8″ (67 mm) | 2-1/4″ (57 mm) | Toyota | 6″ (152 mm) | 1-1/8″ (29 mm) | 4920 lbs (2232 kg) | 6560 lbs (2976 kg) |
| 304093-0800 | Double-Ended | 2-5/8″ (67 mm) | 2-1/4″ (57 mm) | Dana | 8″ (203 mm) | 1-1/8″ (29 mm) | 4920 lbs (2232 kg) | 6560 lbs (2976 kg) |
Note: Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid is not recommended and will void the warranty.
