• Continuing with the line of Trail-Link kits, Trail-Gear has developed a Front 3 link kit to work with  1995-2004 Toyota Tacomas.This kit is affordable, user friendly, and strong. The Panhard is 1.25” x .250” wall DOM material, the other link material is 2″ x .250″ wall DOM tubing, and the rod ends are 1.25″ Creeper Joints. The Panhard bracket on the axle is 3/16” thick and all other brackets are 1/4” steel, formed and welded. Kit includes all necessary link hardware except for upper shock mounts. Upper shock mount location is determined based on the desired ride height and needs of the vehicle. This kit is designed to work with our True Tacoma width LHD Rock Assault axle P/N 140312-1-KIT and high steer.Trail-Gear offers four different Tacoma four 3-Link Suspension kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation.
    Tacoma Trail-Link Front 3-Link Kit Only

    • TG Shock Mount Kit
    • Lower Link Mount
    • Upper Axle Link Bracket
    • Panhard Brackets
    • Driver-side Front Frame Bracket
    • Passenger-side Front Frame Bracket
    • Panhard Bar
    • 3x RH & LH Creeper Joints with Bungs
    • 2x Rod Ends with Bungs
    • Misalignment Spacers
    • Shock Straps
    • Link
    • 3-hole gussets
    Tacoma Trail-Link Front 3-Link Kit A

    • Front Frame Reinforcement Plates (with IFS Box
      Mount Kit)
    • Steering Shaft
    • Steering Couplers
    • Firewall Plate
    Tacoma Trail-Link Front 3-Link Kit B

    • Front Extended Brake Lines
    • Fully Loaded Calipers
    • Caliper Hard Lines
    • Vented Brake Rotors
    • Knuckle Service Kit with Wheel Bearings
    • Tacoma High Steer Kit
    • Fully Loaded Six Shooter Knuckles
    • Knuckle Hardware
    • 86-88 IFS Steering Box
    • Oil Pan Kit (2.7L or 3.4L)
    • Power Steering Hose Conversion Kit
    • Single T-Case Crossmember
    Tacoma Trail-Link Front 3-Link Kit C

    • Rock Assault Front Axle Housing
    • Rock Assault Steering Stops
    • Dirty 30s 30 Spline Birfield/Axle Kit
    • Assembled 3rd Member
    • Your choice of a Detroit or ARB Locker

    Note: Compressor is included in Kit C w/ARB Locker.


    Note For The Tacoma Trail-Link Front 3-Link Kit A, B, and C: You will need the following components to complete your build:

    • (2) Toyota Solid Axle Spindles, 140205-1-KIT
    • (2) Brass Spindle Bushings, 140105-1-KIT
    • (2) Toyota Solid Axle Hubs (PN: 140448-1-KIT) or 140449-1-KIT
    • (2) Aisin Locking Hub (PN: 300468-1-KIT or (1) Creeper Flange Kit (PN: 140134-1-KIT)
    • (1) Super Metal Hub Stud Kit (PN: 300578-1-KIT)
    • (1) Super Metal Spindle Stud Kit (PN: 300573-1-KIT)
    • (12) Front Wheel Studs (PN: 140392-1-KIT)
    • (12) Toyota Lug Nuts (PN: 140080-1-KIT)
    • (1) Steering Stop Kit (PN: 303309-1-KIT)
    • (1) Set of Wheel Spacers may be required with some rims to clear the brake calipers
    Note: Front bumpers that mount to factory bumper mounting locations will not work with this kit.  You will need a bumper that mounts to alternate locations, such as the Rock Defense Tacoma Front Bumper.

Additional information

Weight 465 lbs
Dimensions 48 × 36 × 18 in

1995, 1996-2004


2.7L, 3.4L